IFS-15S Fiber Master
The IFS-15S core-alignment fusion splicer with the new Digital Analysis Core Alignment System (DACAS) is one of the most dependable splicer on the market. The IFS-15S has a friendly, intuitive GUI (Graphical User Interface) with a 4.3 inch high-resolution color LCD screen that is easy to see and use. With a compact size of the fusion splicer (155mm*130mm*137mm), IFS-15S STANDARD Master brings much more convenience for customers who works in the telecommunication field. Besides the compact size, the most significant innovation is the compatibility. The IFS-15S is compatible with being widely used fibers and cables. It combines the function of both splicing and heating for those cables which are popular in FTTx: 250μm fiber, 900μm fiber, flat cable, and fiber jumper.
Typically 150 cycles
IFS-10 serves over 150 cycles of splicing. The battery capacity is 4200mAH. Also, the battery life will be demonstrated via 5 stage of battery indicator
Easy exchange of electrodes
The electrode does not require using screw driver. It can simply remove and replace with one’s hand. Replacement procedure is following; Loosen screw located on electrode cover-->take electrode out of electrode cover (Electrode is fitted in electrode cover).
Easy to clean the mirror
Anti-fog treated mirror is included in IFS-15H. It does not require cleaning the mirror as replacement any parts. Easy maintenance of mirror gives better splicing results.
Heating oven with a zoom window
After splicing, it is clear to figure out sleeve processing. IFS-15H heat oven has a magnifying glass. Users can easily check the sleeve via magnifying glass window.
LED light is enough bright to work in dark place. Users can find out thin optical fiber during working in dark environment.
Independent clamp motion
Both clamps are independent to adjust each other. If the clamp needs to be replaced, it can change one clamp not both.
IFS-15H monitor is protected by tempered glass LCD. Core image is clearly showed with the highest resolution 4.3” LCD monitor.
|Weight||1.82kg without battery|
|Compatible Fiber/Cable||0.25mm/0.9mm/2.0mm/2.4mm/3.0mm/ Flat cable|
|Fiber Count||Single Core|
|Fiber Holder||Universal type fixed holder|
|Fiber Cleave Length||Diameter 250μm-1000μm: cleave length 8-16mm|
|Splice Mode||Max/Preset 64/24|
|Typical Splice Loss||SM:0.02dB/MM:0.01dB/DS:0.04dB/NZDS:0.04dB/G.657:0.02dB (ITU-T Standard)|
|Splicing Time||SM Quick Mode:7second|
|Estimated Splice Loss||Yes|
|Attenuation Splicing||0.1dB-20dB (0.1dB step)|
|Heat Oven/Heating Time||Heat Mode: 32/Heating Time (Typical): 35 second|
|10mm, 20mm, 30mm, 40mm, 50mm, 60mm|
|Results Storage||100 user mode|
|Mechanical Proof Test||1.96~2.25N [Based on the fiber count]|
|Operating Condition||Operating Altitude:0-5000meter above sea level, 95% relative humidity, - 10~50°C, Max Wind 15m/s|
|Storage Condition||0~95% relative humidity, -40~80°C, Battery: -20~ 30 °C|
|Size/ Color||155*130*137(L*W*H)/Rose Red|
|Display||2 Cameras and 4.3 inch color LCD monitor (with high resolution and shock-proof protect surface)|
|Fiber View & Magnification||X/Y 300X, 180X|
|Power||DC 18V Power Supply|
|No of splice/Heating
|Typical 157 times(Splice + Heat) / Splice + Heat=26.7mA/time Battery:4200mAh|
|Electrode||2500 Times Splicing|
|Terminal||USB 2.0/RS232 (for storage and upgrading)|
|Other Functions||IFS-15S Exclusive Software /Standard Heat Oven |
|High Precison Cleaver||VF-15h||1|
|Cigarette Lighter Cable||CJ-11||1|
Rabaty przyznawane automatycznie na cały asortyment sklepu, w odniesieniu do spawarek nie mają zastosowania w pełnej wysokości
św Józefa 141D
tel.: +48 32 239 6000
tel.: +48 32 239 6001
fax.: +48 32 239 6010